Planers - Portable Wood Planers - Delta, DeWalt

Four-column head lock that secures the cutterhead against four steel posts, greatly reducing the movement that causes snipe

Extra-long infeed and outfeed tables provide greater material support

Powerful 15.0 Amp motor

10,000 rpm cutterhead speed provides 64 cuts per inch

Turret depth stop allows the user to

Knives are made of M2 laminated high speed tool steel which last up to five times longer than other knives

Knives can be resharpened multiple times

Thickness scale, material removal gauge and graduated depth crank make accurate planning easy

Magnetic knife setting gauges and wrenches store onboard for fast, easy and accurate knife changes

Includes: Extra Set Of M2 Laminated High Speed Tool Steel Knives and Dust Hood

Variable 6,000 to 11,000 rpm speed range.

Poly-V belt drive for maximum transmission of power to cutterhead with minimum belt slippage.

Balanced aluminum ball bearing cutterhead for smooth operation; maintenance-free life.

Two-knife cutterhead with jack-screw knife leveling arrangement for easy replacement and adjustment of individual knives.

Built-in cutterhead lock to facilitate knife replacement and adjustment.

Convenient infeed table raising/lowering control with dual English/Metric scale to facilitate depth of cut adjustment; lock knob securely holds desired setting.

Built-in chip chute directs dust and chips away from operator, motor and electricals.

Rubber base pads, to minimize operating vibration; dampen noise level.

Click Here to Buy

Full 15 amp. Motor powers cutter head and feed rolls; feed rate adjusts under load for optimum planning.

Poly V-belt and pulley cutter head drive with rugged gearbox/chain and sprocket feed roll drive for maximum power transmission.

Cutter head effortlessly raises and lowers on four precision ground columns for stability.

Solid steel 2-knife ball bearing cutter head assures smoother operation; maintenance free life.

High-speed steel knives are double edged/reversible for twice the cutting life.

Knives project only .065'' above cutter head surface to reduce kickback and dampen noise.

2-Speed material feed rate system (Diameter of Feed Rolls are 1 - 3/8'')

Patented cutterhead lock stabilizes cutterhead to virtually eliminate snipe

High-speed double-sided knives

Full range depth stop for repeatable thickness at any dimension across the entire height range.

Blade zero indicator sets the cutterhead to the exact thickness of the material

Motor Control - Oversized On/Off switch with Lock Out